Seneca Z-GPRS3 2G Datalogger with built-in and expandable I/Os, logic functions, remote control and alarm management

Power supply 11..40 Vdc 19..28 Vac
Power consumption 2 W (standby) 6,5 W (max)
Insulation 1500 Vac
Protection degree IP20

LED status Ethernet
I/O
Communication (RX/TX)
GSM
Power supply

Operating temperature -10..+50°C
Dimensions (LxHxP) 35x100x112 mm
Digital inputs N° 4 channels PNP, NPN (counters @32bit up to 30 Hz), 30 Vdc max input voltage
Analog inputs N° 2 channels, range 0..20 mA, 0..30 V, 16 bit
Digital outputs N° 2 relays output SPDT max 2 A 250 Vac
Ethernet port N° 1 100 Mbps (RJ45)
Serial ports N° 1 RS485 ModBUS Master, programmable baud rate
N° 1 RS485/RS232, programmable baud rate via terminals
USB interface MicroUSB
Supported protocols Ftp client, Smtp, HTTP, ModBUS TCP, ModBUS RTU
Programming software SEAL 2.1 and later versions

CPU K64 120 MHz
RAM 256 kB
Flash (program storage) 1 MB
Flash (serial storage) 8 MB
Micro SD slot Push-pull slot. SD supports up to 32 GB
Micro SD card Supplied
Data logging Measures, alarms, logging on MicroSD card or Flash memory
Libraries and features GSM/GPRS Data exchange, alarm management, commands, events
Variable log management and real-time ModBUS/Ethernet, I/O's, thresholds, controls, and bit operations Firmware and remote configuration via FTP and web server
Supported via modem ModBUS TCP-IP functions, FTP, and web server
Additional features Mathematical functions, filters of ModBUS alarms, post/get http via modem and PPP
Certification CE
Norms EN 301511, EN 301489-1/7, EN 60950